2% Milk Build Guide
- Put switches into top of the case with led slots pointed away from the port
- Solder headers to milk PCB with the 40% logo and the short pins on the same side
- (Optional) Solder 4cm wire to each of the RGB pins
- Put PCB and solder switches to it (make sure that the orientation is correct)
- Solder Pro Micro to headers (I recommend that you only solder these headers as they are the only
ones that
are used)
- (Optional) Trim headers on Pro Micro
- (Optional) Solder RGB Led to wires and attach to bottom of Pro Micro
- Program with QMK and enjoy